Chapter 1. Overview
 The JL5109C is a 9*port Fast Ethernet (FE) switch with MII/RMIl interface. It supports Quality of Service
 (QoS) functions with 4-level priority queues that ensure the performance of a number of real-time
 network applications.
 The JL5109C integrates a 2K-entry address lookup table and a 4-way associative hash algorithm to validate input values, avoid hash collisions, and maintain forwarding performance. The supported maximum length of a data packet is 4096 bytes. With three types of independent storm filters, the
 JL5109C can filter packet storms. The JL5109Caso integrates an intelligent switch engine that solves theHead-of-Line(HOL) blocking problems.
 The JL5109C supports 16VLAN groups that can be configured as port-basedVLANs and/or 802.1Q tag.based VLANs.
 1.1.Feature List
 ●Basic Switch Functions
 Upto 8x10BASE-T/100BASE-TX Ethernet ports +1MI/RM port
 Complies with IEEE 802.3/8023u Auto-Negotiation
 Flow control in half-duplex and full-duplex modes
 .Non-blocking wire-speed reception and transmission and non-HOL forwarding
 L2 switching with 2K-entry L2 MAC table, hash-based 4-way, 16-entry hash collision CAM, and 64-
 entry L2 multicast table
 *Jumbo frame support, up to 4096 bytes
 570K bits packet buffer and supports full mesh test from 64B to 1518B
 ·MIBs cover TX/RX packet/bytes counter,UC/MC/Flood packet/bytes counter,packet CRCerror
 counter, and drop counter
 .Quality of Service (QoS)
 Supports high.performance QoS function on each port
 4-level Priority Queues
 Weighted Round Robin service and Strict Priority
 .1Q-based,Port-based, DSCP-based priority assignments
 Supports Queue Management Operations
 ·Disables scheduling of packets on a port
 ·Disables queuing new packets to a port
 *Allows a port to be drained without sending out packets
 .Allows one port traffic to be sent out to another port
 *Allows checking whether a port is empty or not
 ·VLAN Functions
 16-entry VLAN groups
 .Flexible 802.1Q port/tag-based VLAN
 for
 16 VLANs are selected from a "cam-type-matching"
 ·Diagnostic Functions
 Supports hardware loop detection function with LEDs and buzzer to indicate the existence of a loop
 .Flexible LED indicators
 *Loop status indication
 ·LEDs blink upon reset for LED diagnostics
 Other Functions
 Supports Ingress/ Egress port mirror
 ●Multicast/Broadcast stor control with separate token buckets for flooding, broadcast, and
 multicast packets
 *Multicast/Broadcast storm control is either packet or byte-based, configurable per egress port
 32·entry L2 classification table for advanced application
 STP.Supports BPDUand LLDP parsing.Supports port status (forwarding,listening,blocking
 assignment by SW).
 Physical layer port Polarity Detection and Correction function
 *Single 3.3V power input can be transformed by integrating LDO regulator to generate 1.1V from
 3.3V via a low-cost extemal Diode
 25-MHz crystal or 3.3V OSC input
 88-pin QFN package for 9-port FE Switch
 1.2.Applications
 ·SOHO FE Switch
 9=Port Switch (10BASE-Tand 100BASE-TX)
 ●HomePNAVHome Plug bridge
 ●Set-Top Box/TV

